Rezumat articol ediţie STUDIA UNIVERSITATIS BABEŞ-BOLYAI

În partea de jos este prezentat rezumatul articolului selectat. Pentru revenire la cuprinsul ediţiei din care face parte acest articol, se accesează linkul din titlu. Pentru vizualizarea tuturor articolelor din arhivă la care este autor/coautor unul din autorii de mai jos, se accesează linkul din numele autorului.

 
       
         
    STUDIA CHEMIA - Ediţia nr.3,%20Tom%20I din 2016  
         
  Articol:   HYDROGEN PEROXIDE ELECTROSYNTHESIS AND DETECTION IN SULPHATE MEDIA.

Autori:  ANA-DOMNICA MĂRINCEAN, SORIN-AUREL DORNEANU, PETRU ILEA. 		 
       
         
  Rezumat:   The increase of the graphite electrocatalytic activity toward hydrogen peroxide (HP) electrosynthesis (HPE) by the partial electroreduction of O2 can be achieved by in-situ electroactivation (EA). Our previous studies completed in strong alkaline media (1 M NaOH) by galvanostatic multi-sequence EA techniques (MSETs) revealed that an adequate graphite EA can improve HPE current efficiency (CE) up to 35 % compared to the unmodified graphite. In order to implement the optimised operational parameters to a micro-pilot scale electrochemical reactor, in a first step, several systems for the on-line HP concentration monitoring were designed and tested. Unfortunately, the preliminary test, even in moderate alkaline media (0.1 M NaOH) revealed that, at concentrations greater that 50 ppm, the HP decomposes intensively in contact with the setup components, disallowing the HP accumulation. As a consequence, for all further experiments, the alkaline supporting electrolyte was replaced with 0.1 M Na2SO4. In these new conditions, two models of HP on-line detectors (spectrophotometrical and amperometrical) were designed and tested, presenting adequate limit of detection (L.O.D. = 10 ppm and L.O.D. = 0.23 ppm, respectively). Also, the HPE process was studied in sulphate media, using a Pt/graphite wall-jet ring disk electrode system, revealed that the CE can reach a 46 % value for the unmodified electrode and increases up to 52 % when the auto-adaptive galvanostatic MSETs protocol is used.

Keywords: hydrogen peroxide electrosynthesis, graphite electroactivation, hydrogen peroxide on-line monitoring, wall-jet ring disk electrode, auto-adaptive techniques
 
         
     
         
         
      Revenire la pagina precedentă